|
Smart Dilutor - Gravimetric Diluter |
 |
The SMART DILUTOR is a gravimetric device used to perform dilutions based on the control of the weight.
The SMART DILUTOR in a few seconds is able to make a precise dilution in a sterile polyethylene bag, saving an enormous amount of workmanship.
As additional capability it can dispense accurate liquid weights...
|
| Request More Info |
|
Play DEMO PDF (3060Kb) |
| Sterilization: All the parts of the SMART DILUTOR liquid circuit are autoclavable. Removal and reinstalling the tube of the peristaltic pump takes only few seconds. |
| Work made easy: An indeterminate weight of sample is introduced in the bag, the instrument will reach the final weight. Using bags with filter the homogenized sample can be directly transferred to the EDDY JET beaker. |
| Enlarge up to 6 pumps: The instrument can control up to 6 pumps and link two of them at the same time to reduce operation time. |
| Pump motor: |
12-15V, DC |
| Delivery speed: |
950mL/min (tube diameter: 5mm) |
| Weight range: |
2400g, tare included |
| Weight inaccuracy: |
<1% |
| Weight resolution Sample: |
0.01g |
| Weight resolution Dilution: |
0.1g |
| Working temperature: |
+5o to + 40o |
| Data input/output: |
Serial RS232, Barcode and Ethernet |
| Mains: |
85~264ACV 50/60Hz |
| Power: |
40W |
| Dimensions (L x B x H): |
300 x 325 x 365 mm |
| Weight: |
6.5Kg |
| Dilution Specifications |
| Maximum sample weight: |
Compatible with factor,
tare and weight range |
| Dilution ratio: |
Any fraction < 1 with the numerator
and denominator between 1 and 999 |
| Dilution inaccuracy: |
<0.3g |
| Dispensing Specifications |
| Dispensing weight: |
1g to full range |
| Dispensing inaccuracy: |
<0.3g |
| Specifications subject to change without notice |
|
Smart Dilutor Single Pump tubing set. Bottle 5L |
Cat. No. 2700 |
|
Smart Dilutor Two Pumps. tubing set. Bottle 5L |
Cat. No. 2701 |
| Request the voltage and frequency needed |
| Four pumps device (no bottles) |
 |
Cat. No. 2798 |
| Multilevel dilution arm |
|
Cat. No. 2806 |
| Six tubes arm (necessary for the Cat. No. 2798) |
 |
Cat. No. 2823 |
| Support bar-code reader |
|
Cat. No. 2836 |
| Weighing platform for beakers/flasks |
|
Cat. No. 2838 |
| Cable for PC/Printer communication |
|
Cat. No. 5510 |
| Barcode reader |
|
Cat. No. 5701 |
| Specifications subject to change without notice | |
Sample Preparation 
