|
Bio Dilutor - Serial Diluter |
 |
Two models to carry out volumetric dilutions 1 to 10ml for microbiological samples.
Also can perform gravimetric dilutions using a connected external balance.
Both models reduce the workmanship, save time and insure sterility and accuracy. |
| Request More Info |
|
Play DEMO
NEW! PDF (2560Kb) |
|
Sterilization: All the parts of the liquid circuit of BIO DILUTOR are autoclavable. Removal and reinstalling this liquid circuit takes only few seconds. The syringe remains in its holder, protected, during these operations. |
| Contamination free: Fulfill all the requirements to perform dilutions without cross contamination between samples. The samples are retained in the tip or straw, and rinsed down completely with the solvent |
| Accuracy: The BIO DILUTOR incorporates a step by step motor enabling very accurate dilutions. |
| Syringe volume: |
10, 5, 2.5 or 1ml autoclavable |
| Maximum flow speed: |
4 ml/s with 10 ml syringe |
| Minimum volume step: |
1/1000 of the total volume of syringe |
| Use of disposable tip: |
Programmed from the beginning of process |
| Air bubble volume: |
Programmable |
| Sample volume: |
Programmable. Limited to the tip volume (1300 µl) |
| Min. sample volume: |
1% of the syringe volume used. Warning message if it is less than 5% |
| Dilution factor: |
Programmable from 1:1 to 1: 1000 |
| Reproducibility: |
Better than 1% even for dilutions using more than one single syringe stroke |
| Printer communication: |
Serial RS 232, programmable. |
| Mains: |
100/240 V, 50/60Hz |
| Power: |
40W |
| Dimensions (WxHxD): |
30x30x20cm / 11.8x11.8x7.8 in |
| Weight: |
6 Kg / 13.2 lb. |
|
For Advanced only |
| Balance communication: |
Serial RS 232, programmable. |
| Gravimetric dilution: |
By specific weight of solvent |
| Linked programs: |
Up to 9 |
| Specifications subject to change without notice |
| BIO DILUTOR BASIC with handgrip for tips, complete liquid circuit with bottle,10 ml syringe and box of 60 units of gamma-irradiated tips |
Cat. No. 1300 |
| BIO DILUTOR ADVANCED with handgrip for tips, complete liquid circuit with bottle,10 ml syringe and box of 60 units of gamma-irradiated tips |
Cat. No. 1310 |
| Request the voltage and frequency needed |
| Optional foot switch |
Cat. No. 1348 |
| Stainless steel delivery tube for straws for the hand held |
Cat. No. 1502 |
| Stainless steel delivery tube for straws |
Cat. No. 1446 |
| Handgrip for straws with stainless steel delivery tube, without silicone tubing (foot pedal needed) |
Cat. No. 1445 |
| Autoclavable stand for LT syringes without syringe and adapter (no needed for 10 ml) |
Cat. No. 1330 |
| Cable BIO DILUTOR-printer |
Cat. No. 2514 |
| Cable BIO DILUTOR ADVANCED balance (State balance manufacturer and model when ordering) |
Cat. No. 2515 |
| Printer (interface serial, 40 columns) |
Cat. No. 3069 |
| Label printer (Interface serial) |
Cat. No. 3070 |
| Specifications subject to change without notice |
| Box of 24 containers of 60 tips each irradiated with gamma rays |
Cat. No. 1470 |
| Bag 1000 disposable tips not irradiated |
Cat. No. 1322 |
| Bag of 10 stainless steel holders (6O tips) |
Cat. No. 1480 |
| Box of 24 empty containers |
Cat. No. 1490 |
| Box of 1000 irradiated straws |
Cat. No. 1450 |
| Specifications subject to change without notice | |
